Topfloor TF90VB-TRS, Operator'S Manual, Page: 10 / 24

8 TF90-TRS
4 Operation
4.1 Sweeping
Lower the side brushes until the tips touch the ground.
To turn on the desired sweeping function, select and push the button for
the desired function on the control panel.
Always use the button on the left first, regardless of the model.
(Models B and VB: Turn on the main broom drive/Model V: Make ready
for operation)
Only then push the button on the right on the V and VB models. (Dust
extraction unit on)
No function has been assigned to the button on the right on the TF90-
TRS.
Push the sweeper across the area to be swept at a normal pace.
Since the sweeping performance depends on the speed of the brush
rollers, you should neither walk too slowly nor too quickly. (e.g. run)
The side brushes remove dirt from corners and edges.
4.2 Height adjustment of the side brushes
The side brush arms are located on the front side of the sweeper.
The height adjustment fixtures for the side brushes are located on the
side brush arms.
You can lower or raise both or just one side brush as needed.
To lower a side brush:

Push the lever of the side brush adjustment fixture to the front.
To raise a side brush:

Pull the lever to the back.