Topfield TF-T6000 User Reference Download Page 9

Page: 9 / 64

Introduction

1.2 Controlling the digital receiver 3

1.2.2 Remote control

•

switches the remote control to operate your TV.

•

switches the PVR/TV to standby/active mode.

•

switches the remote control to operate the PVR.

•

mutes the sound. Press again to switch back on.

•

changes the video resolution.

•

switches the remote control to operate your audio-video re-

ceiver.

•

not applicable for this model.

•

switches over to the previously viewed service.

•

displays the service information box.

•

set sleep timer in 10 minute increments.

•

select a subtitle track.

•

displays teletext.

•

select an audio track and a sound mode.

•

not applicable for this model.

•

displays the electronic programme guide.

•

select a menu item.

•

Navigation buttons are used to navigate in menus

or to change values for menu options.

•

not applicable for this model.

•

exits from a menu or hides on-screen information.

•

VOL-

VOL+

decrease or increase the volume.

•

displays the main menu. Also used to return to the previous

menu from a submenu.

•

switch to the previous or next service.

•

show, minify or hide the sub-picture.

•

make a bookmark on playback or time-shift.

•

jump to next bookmark position.

Summary of Contents for TF-T6000

































































Search results

Summary of Contents for TF-T6000

Reviews:

Related manuals for TF-T6000

Brands by name

Popular brands

Topfield TF-T6000, User Reference

Search results

Summary of Contents for TF-T6000

Reviews:

Related manuals for TF-T6000

Brands by name

Popular brands