Topens MultiRuta CASAR 800, User Manual

Page: 16 / 33

13
3.5 Hang Opener
Bend Hanging Brackets (1) so they are flat against ceiling. Measure distance from Header Bracket to Ceiling
Mounting Bracket Bolts (4). Mark length on ceiling starting at the Header Wall, along this point is where the
unit will be mounted. Lift door to full open position, rest opener on door. Slide Hanging Brackets on to Ceiling
Mounting Bracket Bolts (4) on the opener. Secure Brackets with Nut (5). For concrete ceilings, drill 8mm(0.3”)
pilot holes into ceiling and insert Concrete Anchors (2). Secure Hanging Brackets to ceiling with Lag Screws
(3). For wood ceilings, drill 4mm(0.16”) pilot holes and secure with Lag Screws (3).
3.6 Fasten Door Bracket
If you have a canopy garage door, a door arm conversion kit is required. Follow the installation instructions
included with the replacement door arm. Exercise care in removing and assembling arm conversion kit.
Keep fingers away from the sliding parts.
NOTE:
Horizontal and vertical reinforcement is needed for lightweight garage doors.