Topens MultiRuta CASAR 800, User Manual

Page: 10 / 33

7
2. ASSEMBLY SECTION
2.1 Open the Chain Package
Drill the one end of chain through the space between the pulley bracket (1) and Idler pulley (2), wrapping it
round the idler pulley (2). Then connect live knots in both ends of the Chain to both ends of the chain
connector (3). Finally push Idler pulley bracket (1) into the rail section which is with holes.
2.2 Assemble the Driving Assembly
The driving assembly (consisting of driving wheel (2), wheel base (3) and splined sleeve (4)) has been well
assembled in the factory. Assemble the Chain in each end of the trolley (6), and then put them in the rail.
Trolley (6) and chain connector (5) should lock together.
NOTE : Rope’s lever (7) should be toward the door opener unit.
Wrap the chain round the driving wheel (2), and push the driving assembly into the rail.
2.3 Assemble the Rail