8
9
EN
Mode
Explanation
• For charging 12-volt lithium-ion batteries, including lithium
iron phosphate.
• White LED will illuminate.
• An advanced battery recovery mode for repairing and storing,
old, idle, damaged, stratified, or sulfated batteries.
• White LED will illuminate and flash.
• For charging 6-volt Wet Cell, Gel Cell, Enhanced Flooded,
Maintenance-Free.
• White LED will illuminate.
• For charging 12-volt batteries in cold temperatures below
14ºF (-10ºC) or AGM batteries.
• For batteries with small capacity.
• White LED will illuminate.
12V Cold/AGM
(Small)
6V Norm*
12V Lithium**
12V Repair &
Engine Pulse
Charging
*ONLY available for 6-volt lead-acid batteries, as Wet Cell, Gel Cell, Enhanced Flooded, Mainte-
nance-Free.
Consult the battery manufacturer before using this mode.
**ONLY available for 12-volt lithium-ion batteries, including lithium iron phosphate.
Consult the lithium battery manufacturer before charging and ask for recommended charging
rates and voltages. Lithium-ion batteries are made and constructed in different ways. Some
lithium-ion batteries may be unstable and unsuitable for charging.
3. Connecting to the Battery
The below instructions are for a negative ground system (most common).
If your vehicle is a positive ground system (uncommon), follow the below instructions in re-
verse order:
1) Connect the positive (red) battery clamp or eyelet terminal connector with the positive
battery terminal, which is typically marked by “POS, P, +”.
2) Connect the negative (black) battery clamp or eyelet terminal connector with the negative
battery terminal, which is typically marked by “NEG, N, -”, or with the vehicle chassis.
3) Connect the battery charger’s AC power plug into a suitable electrical outlet.
4) Disconnect the battery charger in the reverse sequence, removing the negative first (or
