-18-
ArtiLink300 Code Reader User Manual
Cautions
Please ensure that the vehicle battery is fully charged
and the tools are closely connected to the vehicle DLC to
avoid erroneous data generated by tools and diagnostic
systems.
Keep clothing, hair, hands, tools, test equipment, etc.
away from all moving or hot engine parts.
Please do not use the code reader during driving.
Keep the scan tool dry, clean, free from oil/water or
grease. Use a mild detergent on a clean cloth to clean
the outside of the scan tool, when Necessary.
Keep the code reader out of the reach of children.
Warnings
Always perform automotive testing in a safe
environment.
DO NOT smoke near the vehicle during testing.
DO NOT place the code reader near the engine or exhaust
pipe to avoid damage from high temperatures.
DO NOT wear loose clothing or jewelry when working on
an engine.
DO NOT connect or disconnect any test equipment while
the ignition is on or the engine is running.
When an engine is running, it produces carbon monoxide,
a toxic and poisonous gas. Operate the vehicle ONLY in a
well-ventilated area.
Wear safety eye protection that meets ANSI standards.
Engine parts become very hot when the engine is
running. To prevent severe burns, avoid contact with hot
engine parts.
DO NOT disassemble the code reader.
