19
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING GUIDE
If any problem should occur, first consult the following trouble shooting table, and follow the
suggested instructions. Then, if the trouble is not corrected, contact your nearest TOPCON
dealer.
Trouble
Possible Cause
Remedy
Refer to
No illumination
Power cable is not properly con-
nected to the power outlet.
Connect cable to the outlet.
P. 14
Power switch is still OFF.
Turn power switch ON.
----
The lamp socket is damaged from
the heat.
Replace the socket.
P. 31
The lamp has burned out.
Replace the lamp.
P. 31
Fuse has blown.
Replace the fuse.
P. 30
Slit light is too dim The lamp is not correctly inserted.
Insert lamp correctly.
P. 31
Voltage selector setting is incorrect.
(except for USA and Canada)
Check voltage selector and
set it to the correct position.
P. 12
Fuse has blown
Voltage selector setting is incorrect.
(except for USA and Canada)
Check voltage selector and
set it to the correct position.
P. 12
Type of fuse used is incorrect.
Replace with the correct
type as specified.
P. 30
Summary of Contents for SL-1E
Page 1: ...INSTRUCTION MANUAL SLIT LAMP SL 1E...
Page 2: ......
Page 40: ......
Page 42: ...SLIT LAMP SL 1E 44615 95997 Printed in Japan 1106 100TH 7...
