Topcon PC-CDU User Manual Download Page 34

Page: 34 / 96

Figure 18. “Site Configuration” dialog box

After

the

button is pressed, the

Site parameters

dialog box will be

closed and the parameters that have been specified in the box will be copied to

PCCDU.ini

. If one then presses the

Start

button in the

File Manager

dialog

window, these settings will be enabled and inserted into the newly created (cur-
rent) log file.

On the other hand, if one needs to update the site information for the current log
file, it will be sufficient to press the

Send to receiver

button to send the

new site settings (site name, antenna status, antenna height, etc.) directly to
both the receiver/log-file and

PCCDU.ini

5. Press

Start

. A new log file will be created

and the receiver will start recording data into the file.

If you set a recording interval that is not supported by the receiver, PC-CDU will

launch a utility called

Output Period Setup Wizard

. For more information

on the Wizard, see Appendix B. Output Period Setup Wizard.

To stop data recording and close the file, press the

Stop

button.

To keep track of the data recording process, see how the log-file size varies in time.

The field

Total memory

shows the total amount of space in bytes (in the receiver) available for

data.

The field

Free memory

displays how much space in the receiver is free for storing data.

The buttons

Delete

Refresh

and

Exit

serve the same purposes as in the

Download files

tab

(see 4.2.1.1).

According to the GRIL terminology, this file is referred to as “current log-file”.

Summary of Contents for PC-CDU
































































































Search results

Summary of Contents for PC-CDU

Reviews:

Related manuals for PC-CDU

Brands by name

Popular brands

Topcon PC-CDU, User Manual

Search results

Summary of Contents for PC-CDU

Reviews:

Related manuals for PC-CDU

Brands by name

Popular brands