Topcon Net-G5 Operator'S Manual Download Page 9

Page: 9 / 61

Introduction

P/N: 1004636-01

• • • • • •

Introduction

The Net-G5 is a multi-frequency, GNSS receiver built to be the most advanced and convenient network reference

receiver. The integrated receiver design includes a GNSS receiver board based on Vanguard™ technology, industry

leading Fence Antenna™, internal long-life batteries, memory storage, and optional cellular wireless
communication technology. The Net-G5 delivers world-class positioning and navigation capability to your

application by tracking signals from multi-constellation satellite systems, including GPS, GLONASS, SBAS, BeiDou,

and Galileo.
The Net-G5 can receive and process multiple signal types (including the latest GPS L2C, L5, GLONASS C/A L2, and

GALILEO

signals) improving the accuracy and reliability of the solution, especially under difficult job-site

conditions.

Figure 1: Net-G5 Receiver - Front

Figure 2: Net-G5 Receiver - Back

1. Contact Topcon Technical Support for detailed information about the supported GALILEO signals.

Summary of Contents for Net-G5






























































Search results

Summary of Contents for Net-G5

Reviews:

Related manuals for Net-G5

Brands by name

Popular brands

Topcon Net-G5, Operator'S Manual

Search results

Summary of Contents for Net-G5

Reviews:

Related manuals for Net-G5

Brands by name

Popular brands