Loading New Firmware
P/N 7010-0935
4-23
5. Click the
Device
tab, and then select
Receiver
from the
Device
Type
drop-down list.
Figure 4-18. Set Device Type
6. Click
Get from Device
for device information (Figure 4-18).
7. Click the
Program
tab, and select
Soft Break Capture
from the
Capture Method
drop-down list (recommended) (Figure 4-19).
Figure 4-19. Program Tab Settings
8. Browse for and select the receiver board’s RAM file and Flash
9. Click
Load
, and wait until every file loads into the receiver.
NOTICE
If you selected an incorrect file, an error message
displays at the bottom of the dialog box. Select the
correct file.
Net-G3A_OM_Book.book Page 23 Thursday, May 14, 2009 8:49 AM
