background image

1

INTRODUCTION

Thank you for purchasing the TOPCON Mirror Chart MC-4S.

INTENDED USE / INDICATIONS FOR USE

This instrument is the visual acuity chart which is used in conjunction with the CV-5000.
(Unless this instrument is connected to the CV-5000, it cannot operate as a visual acuity
chart.)

FEATURES

This instrument has the following features:
• The active chart in which the targets are changed and moved is installed.  

You can observe the patient's eye condition with the target's move.

• The animation playback function is installed.  You can check a variety of visual conditions

by watching the displayed image.

• You can set the installing distance to 60cm, 80cm, 95cm, 1m and 1.5m*.

* Only when selecting the H1 type.

PURPOSE OF THIS MANUAL

To ensure the best use of the instrument (safely and efficiently), please carefully read "DIS-
PLAYS AND SYMBOLS FOR SAFE USE" and "GENERAL SAFETY INFORMATION" and
familiarize yourself with the correct safety procedures prior to operating the MC-4S.
Keep the user manual on hand for future reference.

This instrument should be used in conjunction with a CV system.

There are three methods to operate the MC-4S through the CV-5000.
• Operate the MC-4S with the 1Dial Controller KB-50S.
• Connect the mouse to the monitor and operate the MC-4S with the mouse.
• Connect a personal computer to the CV-5000 and operate the MC-4S with it.

This manual is made according to operation with the KB-50S.  In the case of "Mouse opera-
tion" and "Personal computer operation", you may use this manual by changing the words to
the specified ones as shown in the following table.

KB-50S
operation

Mouse 
operation

Personal computer 
operation

Controller unit/CV software 
screen of 1Dial Controller

Notation

Switch

Button

Button

Action

Press

Click

Click

Display of 
setting menu

[Shift]+
[Menu]

[Settings] 
button

[Settings] 
button

Display of 
test list

[Shift]+[Prog]

[Examination 
list]

[Examination list]

Monitor unit/CV software 
screen of 1Dial Controller

Action

Touch

Click

Click

Summary of Contents for MC-4S













































































Reviews: