16-3
16 SELECTING MODE
*1) LANGUAGE selection is different in each country.
*2) Applicable only to the instruments with security function
*3) If you forget a password, the instrument needs repair to cancel the password. Please contact
Topcon or your local Topcon dealer.
16.2 How to Set Selecting Mode
<Example>: Setting unit in hPa, °F, NEZ MEMORY: ON
CUT & FILL
STANDARD/
CUT&FILL
In the layout mode, CUT & FILL can be displayed
instead of dZ.
ECHO BACK
ON/OFF
It is possible to output the data of echo back type.
CONTRAST
MENU
ON/OFF
When the instrument is turned ON, it is possible to
display the screen which you can adjust contrast of
the display and confirm the prism constant (PSM)
and atmospheric correction value (PPM).
PASSWORD
*2)
ON / OFF
When the instrument is turned ON, the screen to
request the password will appear. *3)
Operating procedure
Operation
Display
1
While pressing [F2] key, turn power ON.
[F2]
+
Power ON
2
Press [F1](UNIT SET) key.
[F1]
3
Press [F1](TEMP. & PRES.) key.
[F1]
4
Press [F2](°F) key, and press
[F4](ENTER) key.
[F2]
[F4]
5
Press [F1](hPa) key, and press [F4] (ENTER) key.
Returns to unit set menu.
[F1]
[F4]
6
Press [ESC] key.
Returns to PARAMETERS 2 menu.
[ESC]
7
Press [F3](OTHERS SET) key.
[F3]
8
Press [F4](P
↓
) key, to get the function in page 2.
[F4]
PARAMETERS 2
F1:UNIT SET
F2:MODE SET
F3:OTHERS SET
UNIT SET 1/2
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE P
↓
TEMP. & PRES. UNIT
TEMP. : °C
PRES. : mmHg
°C °F ––– ENTER
TEMP. & PRES. UNIT
TEMP. : °F
PRES. : mmHg
hPa mmHg inHg ENTER
UNIT SET 1/2
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE
PARAMETERS 2
F1:UNIT SET
F2:MODE SET
F3:OTHERS SET
OTHERS SET 1/5
F1:H-ANGLE BUZZER
F2:S/A BUZZER
F3:W-CORRECTION P
↓
OTHERS SET 2/5
F1:NEZ MEMORY
F2:REC TYPE
F3:CR,LF P
↓
