8-9
8 LAYOUT
7
When the display value dHR, dHD and dZ are
equal to 0, the layout point is established.*3)
8
Press the [F3](NEZ) key.
The coordinate data is shown.
[F3]
9
Press the [F4](NEXT) key to set next layout point .
PT# is automatically incremented.
[F4]
*1) Refer to Section 2.5 “How to Enter Alphanumeric characters”.
*2) Point number could not be entered when data to comply with the coordinate value does not exist in the
file.
*3) Cut & Fill displaying function is available. Refer to Chapter 16 “SELECTING MODE”.
N * 100.000 m
E : 100.000 m
Z : 1.015 m
MODE ANGLE ––– NEXT
LAYOUT
PT#: LP-101
INPUT LIST NEZ ENTER
