Topcon GPT-7500 Series Instruction Manual Download Page 117

Page: 117 / 134

115

11 DETACH/ATTACH OF TRIBRACH

DETACH/ATTACH OF TRIBRACH

The instrument is easily detached or attached to the tribrach.

•

Detachment

1) Loosen the tribrach fixing lever by turning counterclockwise.
2) Lift the instrument straight upwards and off.

•

Attachment

1) Coincide the white alignment piece on the lower part of the instrument with the tribrach alignment

groove.

2) Tighten the tribrach fixing lever firmly by turning clockwise.

•

Locking the Tribrach Fixing lever

The tribrach fixing lever can be locked from being moved accidentally. This is useful if the upper
instrument section is not being detached very often. Simply tighten the securing screw on the fixing
lever with the accessory screw driver.

Alignment piece

Securing screw

Tribrach fixing lever

Tribrach alignment groove

Summary of Contents for GPT-7500 Series






































































































































Search results

Summary of Contents for GPT-7500 Series

Reviews:

Brands by name

Popular brands

Topcon GPT-7500 Series, Instruction Manual

Search results

Summary of Contents for GPT-7500 Series

Reviews:

Brands by name

Popular brands