Topcon GPT-7500 Series Instruction Manual Download Page 109

Page: 109 / 134

107

8 SETTING ATMOSPHERIC CORRECTION

8.2 Setting of Atmospheric Correction Value

•

How to Set Temperature and Pressure Value Directly

Measure the temperature and air pressure surrounding the instrument beforehand.

•

Example : Temperature: +15°C, Pressure:1013.3 hPa

Turn the power switch on.

Press the [

] key.

Press the
[Prism constant value, Atmospheric correction]
icon.

Press the [TEMP.] icon.

Input Temp. value and Press. value.

[Example] *1) Temp. : +15.0°C
Press. : 1013.3hPa.

Press the [ENTER] key.

*1)

Range :

Temp.
-30.0 °C to +60.0 °C  (0.1 °C step) ,
-22.0 °F to +140.0 °F (0.1 °F step)
Press.
560.0 to 1066.0hPa (0.1hPa step) ,
420.0 to 800.0mmHg (0.1mmHg step) ,
16.5 to 31.5inHg (0.1inHg step)

[TEMP.] icon

[ENTER] key

[Prism constant value, Atmospheric correction] icon

Summary of Contents for GPT-7500 Series






































































































































Search results

Summary of Contents for GPT-7500 Series

Reviews:

Brands by name

Popular brands

Topcon GPT-7500 Series, Instruction Manual

Search results

Summary of Contents for GPT-7500 Series

Reviews:

Brands by name

Popular brands