Topcon GLS-1000 SERIES Instruction Manual Download Page 22

Page: 22 / 76

3-3

3 Overview of Scanning

3.2 Display and Functions

The following are examples of the displays and its functions.

Display

Function

Main

Menu

Sub

Menu

NEW STATION

Set a new station.
Refer to Chapter 7.1 “Creating a New Station”.

STATION

MENU

SELECT STATION

Select an existing station.
Refer to Chapter 7.2 “Selecting from Existing Stations”.

OCC/BS SETTING

Set the backsight point name and the occupied point name.
Refer to Chapter 7.3 “Setting the Occupied Point Name and the

Backsight Point Name”.

SCAN

MENU

3D SCANNING

Perform a 3D scanning of the designated area.
Refer to Chapter 8.2 “3D Scanning”.

TARGET SCANNING

Scan the target.
Refer to Chapter 8.1 “Target Scanning”.

PROJECT

MENU

NEW PROJECT

Set a new project.
Refer to Chapter 6.1 “Creating a New Project”.

SELECT PROJECT

Select an existing project.
Refer to Chapter 6.2 “Selecting from Existing Projects”.

SETTING

MENU

NETWORK SETTING

Set the network.
Refer to Chapter 5.2.2 “Network Settings (when the instrument is

used connected to a PC)”.

DATA MANAGE

Edit the data.
Refer to Chapter 5.2.3 “Editing the SD Card Data (data

management)”.

TEMP.&PRES. SET

Set the temperature and air pressure.
Refer to Chapter 5.2.4 “Setting the Temperature and

Atmospheric Pressure”.

LAST CALIB. DATE

Display the last calibration date.
Refer to Chapter 5.2.5 “Displaying the Last Calibration Date and

Time”.

TIME ADJUST

Set the time.
Refer to Chapter 5.2.6 “Setting the Date and Time”.

UNIT SET

Set the units.
Refer to Chapter 5.2.7 “Changing the Units”.

TILT 0 ADJUST

Adjust the tilt sensor installation error.
Refer to Chapter 5.2.8 “Adjusting the Tilt Sensor Installation

Error”.

STATION MENU

F1 NEW STATION

F2 SELECT STATION

F3 OCC/BS SETTING

Main Menu

Sub Menu

Display

Summary of Contents for GLS-1000 SERIES












































































Search results

Summary of Contents for GLS-1000 SERIES

Reviews:

Related manuals for GLS-1000 SERIES

Brands by name

Popular brands

Topcon GLS-1000 SERIES, Instruction Manual

Search results

Summary of Contents for GLS-1000 SERIES

Reviews:

Related manuals for GLS-1000 SERIES

Brands by name

Popular brands