19. CHANGING THE SETTINGS
126
[HVDOUT-S]
: Output distance and angle measurement results to an external device
(SET format)
[NEZOUT-S]
: Output coordinates data to an external device (SET format)
[HVOUT-T]
: Output angle measurement results to an external device (GTS format)
(can only be allocated to 1 above)
[HVDOUT-T]
: Output distance and angle measurement results to an external device
(GTS format) (can only be allocated to 1 above)
[NEZOUT-T]
: Output coordinates data to an external device (GTS format) (can only
be allocated to 1 above)
[F/M]
: Switch distance units between meters/feet
[HT]
: Set the instrument station, coordinates and instrument height
[S-LEV]
: Return signal
[TILT]
: Display tilt angle
[MOTOR]
: Display <Motor>
[INV]
: Rotates the instrument 180°
[SRCH]
: Automatically sights the center of the target
[Fix Vel]
: Fixed velocity rotation around vertical and horizontal axes
[EDM]
: EDM settings
[MENU]
: Display <Menu> (coordinate measurement, setting out measurement,
offset measurement, REM measurement, missing line measurement,
resection, area calculation)
[COORD]
: Coordinates measurement
[S-O]
: Setting-out measurement
[OFFSET]
: Offset measurement
[A-OFS]
: Angle offset menu
[D-OFS]
: Distance offset menu
[2D-OFS]
: Offset/2D menu
[MLM]
: Missing line measurement
[REM]
: REM measurement
[RESEC]
: Resection measurement
[AREA]
: Surface area measurement
[CNFG]
: Set setting out accuracy (can only be allocated to 2 and 3 above)
[H.TURN]
: Rotate the instrument to the entered horizontal angle. Rotate
horizontally to the angle for the setting out point when performing
setting out (can only be allocated to 2 and 3 above).
[SHVR]
: Switch distance mode between slope distance (SD)/horizontal
distance (HD)/height difference (VD)/REM (R) in setting out screens.
The capitalized letter in the softkey indicates the currently selected
mode (can only be allocated to 2 above).
[OK]
: Terminate setting out measurement for the selected setting out point
and return to <Key in coord>. This setting out point will be removed
from the list (can only be allocated to 3 above).
Summary of Contents for DS-101AC
Page 175: ......
