14. RESECTION MEASUREMENT
82
7. If there are problems with the results of a point,
align the cursor with that point and press
[OMIT]
.
“OMIT” is displayed to the right of the point.
Repeat for all results that include problems.
8. Press
[RE CALC]
to perform calculation again
without the point designated in step 7 The result
is displayed.
If there are no problems with the result, go to step
9.
If problems with the result occur again, perform
the resection measurement from step 4.
• Press
[RE_OBS]
to measure the point
designated in step 7.
• Press
[ADD]
in the second page when there is a
known point that has not been observed or when
a new known point is added.
If no points are designated in step 7, all the points
or only the final point can be observed again.
9. Press
[OK]
to finish resection measurement and
return to <Resection/Menu>. Only Z (elevation) of
the instrument station coordinate is set. N and E
values are not overwritten.
Summary of Contents for DS-101AC
Page 175: ......
