Topcom BUTLER E600 TWIN, User Manual

Page: 26 / 188

26
Personalize the handset
6 Personalize the handset
6.1 Adjusting the ring volume
Handset ring volume internal/external calls
The handset ring volume for internal or external calls cannot be set separately. You can choose from
high, mid, low and off.
6.2 Silent mode
You can turn the handset ringer off, so that you won’t be disturbed, by a single key press:
6.3 Choosing the ring melody
Each handset can ring with a different melody. The handsets can ring with a different melody
according to whether the call is internal or external. You can choose from 8 different ringer
melodies:
6.4 Automatic answer
When there is a incoming call and the handset is on the base, the phone automatically takes the line
when lifted. This is the default setting, but can be set off:
Every programmation is confirmed at the end by a double or single long beep.
A double beep confirms the validation of your choice.
When the handset is inside the base, the base will not ring during incoming call. So
when the handset ring volume is turned off and handset is inside the base, your
phone will not ring anymore!
1
Enter the menu by pressing the left menu key.
2
Select “ HS SETTINGS ” and confirm.
3
Select “ RING SETUP ” and confirm.
4
Select “ RING VOLUME ” to change the internal & external volume and
confirm.
5
Select a volume (“ HIGH ”, “ MID ”, “ LOW ” or “ OFF ”).
6
Confirm or return to the previous menu.
1
Press and hold the ringer off key for 3 seconds. The ringer will be off and
will appear on the screen.
2
Press and hold the ringer off key again to turn it back on.
1
Enter the menu by pressing the left menu key.
2
Select “
HS SETTINGS
” and confirm.
3
Select “
RING SETUP
” and confirm.
4
Select “
INT RING
” to change the internal melody or “
EXT RING
” to
change the external melody and confirm.
5
Select a melody (1 to 8).
6
Press the OK key to confirm or return to the previous menu.
1
Enter the menu by pressing the left menu key.
2
Select “ HS SETTINGS ” and confirm.
3
Select “
AUTO ANSWER
” and confirm.
4
Select “
ON
” to activate or “
OFF
” to deactivate and confirm.