6
Butler 930
Butler 930
5
Installation
5.1
Installing the base
For installation, do the following:
•
Plug one end of the adaptor into the 230V outlet and the other end into the adapter jack
on the bottom of the base.
•
Connect one end of the telephone cord with the wall phone jack and the other end to the
bottom of the base. Use the included telephone cord.
1.
Power cable
2.
Telephone wall outlet
3.
Telephone cord
4.
Bottom view of the base
5.2
Installing the batteries
•
Open the battery compartment (see below).
•
Insert the batteries
respecting the (+ and -) polarity
.
•
Close the battery compartment.
•
Leave the handset on the base unit for 16 hours. The handset charging indicator
LED
on the base unit will light up.
Before you use the telephone for the first time, you must first make
sure the batteries are charged. If not, the telephone will not work
optimally.
Butler 930
7,5V DC 300mA
1
2
3
4
17
