
Butler 930
21
Butler 930
ENGLISH
11.3
Editing the one-touch memory numbers
Perform the same steps as described in “10.3 Changing a name or number in the
phonebook”
.
11.4
Deleting a one-touch memory number
Perform the same steps as described in “10.4 Deleting one or all entries from the phonebook”
12 Base operation
12.1 Flash time setting
You can set the flash time to short (100ms) or long (300ms). The time is set to 100ms by
default! However, if your system requires a longer flash time, you can change it:
•
Press the left ‘
Menu
’ key.
•
Press the up or down key
/
repeatedly until ‘
BS Settings
’ is selected.
•
Press ‘
Select
’ to confirm.
•
Press the up or down key
/
repeatedly until ‘
Flash Time
’ is selected.
•
Press ‘
Select
’ to confirm.
•
Select
–
‘
Flash-1
’: (short) to have a flash of 100ms
–
‘
Flash-2
’: (long) to have a flash of 300ms
•
Press ‘
Save
’
to confirm your selection or press ‘
Back
’
to leave the menu without
saving.
12.2 Changing the PIN code (system PIN code)
Certain functions are only available if you know the PIN code of the base.
The PIN code has 4 digits. The default PIN code setting is ‘0000’. If you would like to change
the PIN code and set your own secret code, do the following:
•
Press the left ‘
Menu
’ key.
•
Press the up or down key
/
repeatedly until ‘
BS Settings
’ is selected.
•
Press ‘
Select
’ to confirm.
•
Press the up or down key
/
repeatedly until ‘
Modify PIN
’ is selected.
•
Press ‘
Select
’ to confirm.
•
Enter the current pin and press ‘
Next
’.
•
Enter the new pin and press ‘
Next
’.
•
Enter the new pin again and press ‘
Save
’
to store the new pin or press ‘
Back
’
to
leave the menu without saving.
12.3 Setting the dialing mode
There are two types of dialing modes that can be used on a telephone line:
•
DTMF/Tone dialing (the most common)
•
Pulse dialing (for older installations)
The one-touch memory names are stores in the phonebook as M1:, M2:,
M3:, and M4:. When you edit the name you can only add something like
‘M1: Home’ but you can’t delete the default name.
15
7
15
7
13
5
15
7
15
7
13
5