Butler 930
13
Butler 930
ENGLISH
7.4
Receiving a Call
During internal or external incoming call, the handset will start to ring. You can change the
ring volume by pressing the up or down keys
/
.
•
All subscribed handsets will ring when you receive a call.
•
The telephone number of the caller appears on the display if you have Caller ID service
(CLIP). Consult your telephone company. The name of the caller also appears on the
display if:
–
the number is programmed into the phonebook with name.
–
the network sends the name together with the telephone number .
•
Press the off hook key
to accept the external call.
•
OR
Lift the handset off its base unit (if the auto answer option is active, see §“7.21 Auto
answer”).
•
During the conversation the
symbol appear on the display and the call timer starts
to run.
•
After finishing your call, press the on hook key
to hang up or put the handset
back on the base unit.
7.5
Redial list options
When scrolling through the redial list (see §“7.3.4 Redial one of the last 10 numbers dialed”)
you have the following options:
When the desired number is shown on the display press ‘
More
’
and select with the up
and down keys
/
the following options:
•
‘
Add to PB
’: to store the number into the phonebook memory. Press ‘
Select
’ to confirm.
Enter a name (See §“10.1 Adding a number and a name to the phonebook”) and press
‘
Next
’
. Edit the number and press ‘
Next
’. Select the desired ring melody and press
‘
Save
’ .
•
‘
Delete Call
’: to delete an entry in the redial list. Press ‘
Del
’ to confirm.
•
‘
Delete All
’: to delete all entries in the redial list. Press ‘
Del
’ to confirm.
7.6
Activate / deactivate handsfree function
This function allows you to communicate without having to pick up the handset. When you
are talking, press the handsfree key
to activate the handsfree function.
Press the
button again to deactivate the handsfree function.
7.7
‘Out of range’ warning
If the handset is out of range of the base unit, a warning signal will sound.
•
‘
SEARCHING
’ appears on the display and the symbol
blinks on the display.
•
Move closer to the base unit.
•
As soon as you are back within range of the base unit, a signal sounds and the symbol
stops blinking.
When you are calling in handsfree mode and you want to change the
volume, press up or down key
/
repeatedly.
When you use the handsfree function for a long time, the batteries
will drain quickly !
15
7
12
6
13
15
7
13
13
12
12
15
7
