Lbl: 0
X:
10.000
Y:
0
F:
660
Z:
-16.880
Meaning: After completing the n005 line execution, then execute this line n006.
X/Y/Z will run with the F value 660 speed. The speed is the resultant speed. The
motion action is the linear interpolation (start at the same time, stop at the same time).
Subject to the previous position, the X axis will move 10.000 to the positive direction,
the Y axis will not move, the Z axis will move 16.880 to the negative direction. After
completing the execution, automatically execute the n007 line action.
3
）
Abs M(Absolute motion): Run with the given F value speed of this line, in absolute
coordinates. The Start speed≤the F value≤the axis high speed. When the input F value
is less than or equal to the start speed, the running speed is the start speed value.
When the input F value is greater than or equal to the axis high speed, the running
speed is the axis high speed value. The start speed(St HSpd(Start high speed)) and the
axis high speed are set in the Pars Set(Parameters settings)→Sys Pars(System
parameters)→Spd Pars(Speed parameters).
Example:
n009
Abs M
File: 3399
Lbl: 0
X:
30.000
Y:
---------
F:
880
Z:
-16.880
Meaning: After completing the n008 line execution, then execute this line n009.