9
EN
Soldering gun 60W
SAFETY RULES
I) General safety rules
1. Read the user manual and follow the instructions. Learn how to use the product
by reading the user manual and become familiar with the safety rules. Keep this
user manual and give it to other people who may use the product.
2. Keep working area clean and tidy. Untidy working areas can lead to acci-
dents.
3. Working environment
Ensure the working area is well lit and ventilated. Do not use these tools with
liquids or gas near by. Do not expose the tools to rain. Do not use them in wet
areas. Check if there are any other requirement depending on their use.
4. Protection against electrical shock. Avoid contacts between the body and su-
faces connected to the earth. (pipes, heaters,)
5. Do not allow visitors to touch the product or the extension cable. All visitors
must be KEPT AWAY. Do not allow this product to be used as a toy.
6. This device may be used by children from age 8 and by persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge,
provided that they are under supervision or have been told how to use the de-
vice safely and are aware of the potential risks. Children must not use the device
as a plaything. Cleaning and servicing tasks may not be carried out by children
unless they are supervised. Tidy-up tools which are not used. Unused tools must
be tidied up in a dry place, locked and kept out of the reach of children. Wait
for the tool to cool down (around 30 minutes) before putting away.
7. Do not force the tool. It is made to perform at its best when it is used at the
power it has been designed for.
8. Use the appropriate tool. Do not use a tool if it has not been made for the
application.
9. Wear appropriate clothes. Do not wear baggy clothes, jewellery that could
be accidently caught. It is recommended to wear gloves and non-slip shoes for
outdoor work. Wear a helmet to retain long hair.
10. Wear safety goggles and hearing protection when working if the noise ex-
ceeds 85dB (A). Noise might exceed the specified values depending on the
working environment and on the material.
11. Do not damage the power supply cable. Do not use the power supply cable
