Soldering gun 60W
14
EN
Soldering gun 60W
MAINTENANCE
Make maintenance operations only when the product is UNPLUGGED.
1 Maintenance
Before making any change, please make sure the product is unplugged and cold. If the power supply cable is melted or cut, the
gun must not be used. There is a risk of electrocution. Any cable repairs must be carried out by a qualified person.
2 Cleaning
The soldering gun oxidises and becomes dirty very quickly. Unplug the gun before cleaning it. Clean the tip before and after each
use with a stripping solution and a sponge. When the gun is hot, it is also possible to clean it with a wet sponge until it is shiny.
3 Changing the tip
Contact our after-sales department to get the correct spare parts. Unscrew the 2 screws and remove the tip. Replace the tip inside
the heating element and retighten the screws.
4 Storage
Keep the product in a dry area, keep out of the reach of children.
WARRANTY
The warranty will not be valid in the event of : abnormal use, incorrent application, electrical modification, damage due to transport,
a handling fault, using non original parts or accessories,or maintenance work done by an unauthorized person.
SAFETY RULES
Using appropriate protection (eyes, hands, respiratory)
PICTOGRAMS
Device complies with europeans directives
This hardware is subject to waste collection according to the European directives 2012/19/EU. Do not throw out in a domestic bin !
This product should be recycled appropriately
The product’s manufacturer contributes to the recycling of its packaging by contributing to a global recycling system. - Für die Ent
-
sorgung Ihres Gerätes gelten besondere Bestimmungen (Elektroschrott).
