@
ToolkitRC
2019
30
Power output
Rotate the Knob on the output main interface to
move the cursor to the [Power] item, press [OK] to
enter the power output function. This product will
output the input power according to the setting
voltage and current, constant voltage and constant
current. The display interface is as shown below
Typical value: It is a common typical output mode,
which can be set into the following 3 modes.
1. Input pass-through: Do not achieve constant
current and constant voltage, and output the input
voltage directly from the output main port.
2, custom: users can manually set the value of
voltage and current limit according to demand
3, commonly used drone battery charging: select
the corresponding battery, automatically configure
the relevant output voltage and current.
Configure the relevant output voltage and current
Summary of Contents for M8
Page 23: ... ToolkitRC 2019 23 ...
