@ToolkitRC 2020
7
Quick start
1，Connect the AC100-240V or DC10-18V power supply
to the corresponding input port on the back of the M4Q.
2，The screen shows the boot logo for 2 seconds.
3，At the same time, accompanied by the sound of di-di
startup.
4，After booting up, the screen enters the main
interface as shown below:
5，short press [CH/Exit], the cursor will switch among
the four channels in sequence.
6，Scroll [Scroll Wheel] to switch to display the voltage
and internal resistance of the corresponding channel.
7，Short press [OK] to select the charging task when the
channel is idle. You can adjust and end the charge when
the channel is in progress.
8，Long press [OK] to enter the system setting interface
when all four channels are free.
