@ToolkitRC 2020
12
Scroll [Scroll Wheel] to adjust the value. When set
to ”Auto”, the charger will automatically identify the
number of cells connected to the battery according to
the battery voltage connected to the output port. Short
press [OK] and [CH/Exit] to take effect and return to the
previous interface.
=================================
Tips
1, Over discharge or overcharge of the connected
battery may cause battery cell identification errors.
2, If the cell number is set incorrectly, it may be
insufficient to charge, or overcharge may damage the battery,
please set it carefully.
3, After Lixx batteries are connected to the balance
port, the number of battery strings can be more accurately
identified.
==================================================
