43
10.2 Switching off the engine
TIP: Switch off all electrical devices.
1. Switch the ECS to “OFF” (1).
2. Disconnect all electrical devices.
3. Set the engine switch (red) to “STOP”.
10.3 AC power connection
(WARNING)
Make sure that all electrical devices are switched off before plugging them in.
(IMPORTANT)
Before connecting to the generator, make sure that all electrical devices, including the cables and plug connec-
tions, are in good condition.
Make sure that the total load is within the rated output power of the generator.
Make sure that the current load of the socket is within the range of the socket’s rated load.
TIP: Ensure that you ground the generator (ground terminal). If the electrical device is grounded, the generator must
always be grounded..
1. Start the engine.
2. Switch ECS to “ON”.
3. Connect the device to the AC socket.
4. Check that the AC indicator is switched on.
5. Switch on all connected devices.
TIP: The ECS must be set to “OFF” to increase the engine speed to the default rated speed. If you need to connect
multiple loads or power consuming devices to the generator, connect the device with the highest inrush current first,
and the device with the lowest inrush current last.
