Waveform welding
Install waveline welding head on welding
gun and lock
Adjust time
Choose the operation mode
Put the waveline at the center of
dent area and start welding
Put the pulling hammer on waveline with multi-claws hooker and pull the
dent.
Note:
1. Please test on other workpiece before this operation, in order to avoid any damage to auto
body surface due to over ranged current or operating duration.
2.The current and duration shall be determined by thickness of body sheet metal.
3.After this operation, the other function operation can be following. If not, please switch off
the machine and disconnect power supply, and arrange all accessories for the next operation.
11
