Carbon rod heating
Install carbon rod with connection head on
welding torch and lock
Adjust time
Choose the
operation mode
Heat the body around bump
area in one-way direction as
circle with carbon rod
Cool down the heated area with cool water, and make it
recover.
Note:
1. Please test on other workpiece before this operation, in order to avoid any damage to auto
body surface due to over ranged current or operating duration.
2.The current and duration shall be determined by thickness of body sheet metal.
3.After this operation, the other function operation can be following. If not, please switch off
the machine and disconnect power supply, and arrange all accessories for the next operation.
10
