EN – V1 - P1
NBT100 BATTERY TESTER
NBT200 BATTERY/CHARGING/STARTING SYSTEM ANALYZER
TEST PROCEDURES / OPERATING INSTRUCTIONS
IMPORTANT :
1.
For testing 12 volts batteries with capacity range:
SAE : 200~1200 CCA
DIN : 110~670 CCA
IEC : 130~790 CCA
EN : 185~1125 CCA
CA(MCA) : 240~1440 CA(MCA)
2.
Suggested operation range 32°F(0°C) to 122°F(50°C) in ambient
temperature.
WARNING :
⚠
WARNING: This product can expose you to chemicals including
arsenic, which is known to the State of California to cause cancer. For
more information, go to www.P65Warnings.ca.gov.
1.
Working in the vicinity of a lead acid battery is dangerous. Batteries
generate explosive gases during normal battery operation. For this
reason, it is of utmost importance, if you have any doubt, that each
time before using your tester, you read these instructions very
carefully.
2.
To reduce risk of battery explosion, follow these instructions and those
published by the battery manufacturer and manufacturer of any
equipment you intend to use in the vicinity of the battery. Observe
cautionary markings on these items.
3.
Do not expose the tester to rain or snow.
PERSONAL SAFETY PRECAUTUONS :
1.
Someone should be within range of your voice or close enough to
come to your aid when you work near a lead acid battery.
2.
Have plenty of fresh water and soap nearby in case battery acid
contacts skin, clothing or eyes.
E
ngl
is
h
