27
3. Feed Depth Adjustment
Turn the depth scale ring to the desired depth, lock the scale ring in place with the depth knob (1).
The drill bit will stop after traveling the distance selected on the depth scale.
Otherwise you can read the depth from the digital depth display.
4. Speed Adjustment
This drill press has12 speeds shown in the speed label. To change the speed:
Open the belt cover.
Loosen the belt tension knob ( 2 ) to adjust the belt tension. Next, change the belt locations on the pulleys.
Tighten the belts again by rotating the belt tension knob.
Otherwise you can read the speed from the digital speed display.
5. Quill Spring Adjustment
The quill return spring may need adjustment if the tension causes the quill to return too rapidly or too slowly.
Take out the screw and carefully turn the spring cap counterclockwise, attach the screw to anther hole of the spring cap.
Digital Depth and Speed Display
Spring cap
Screw
Summary of Contents for TF-32TE
Page 17: ...14 SCHEMA DE MONTAGE VUE ECLATEE...
Page 34: ...31 ASSEMBLY DIAGRAM...
