25
5. Install three feed handles into the hub.
6. Connect the lamp plug contact to the power source plug contact in the drill head. Use four pan head screws to install the
lamp assembly to the head. Turn on the LED lamp switch to check the lamp.
7. Install the chuck
WARNING:
Before any assembly of the chuck and arbor to the drill press head, clean all mating surfaces with a non-petroleum
based product; such as alcohol or lacquer thinner. Any oil or grease used in the packing of these parts must be removed;
otherwise the chuck may come loose during operation.
7.1 Push the arbor onto the spindle
7.2 Push the chuck onto the arbor.
7.3. Using a wood mallet, firmly tap the chuck upward into position on the spindle shaft.
8. Install the chuck guard assembly
Assemble the chuck guard parts together.
Connect cable line plug connector of chuck guard to the machine plug connector. Install the chuck guard assembly to
head by two screws.
Feed handle
Pan head screw
Plug contact
Laser switch
Summary of Contents for TF-32TE
Page 17: ...14 SCHEMA DE MONTAGE VUE ECLATEE...
Page 34: ...31 ASSEMBLY DIAGRAM...
