63
:WINDow <NRf>
Command syntax:
:HOLD:WINDow <NRf>
Command Parameter:
<NRf> =
0.01 to 10
Set window (percent)
Query:
:WINDow?
Query Hold window
Description:
This command is used to set the window for HOLD. This window is expressed as a percent of the
―seed‖ reading for the Hold process.
:COUNt <NRf>
Command syntax:
:HOLD:COUNt <NRf>
Command Parameter:
<NRf> =
2 to 100 Specify HOLD count
Query:
:COUNt?
Query HOLD count.
Descripton:
This command is used to specify the count for HOLD. COUNt is the number of readings that are
compared to the ―seed‖ reading during the HOLD process.
:STATe <b>
Command syntax:
:HOLD:STATe <b>
Command Parameter:
<b> = 0 or OFF
Disable HOLD
1 or ON
Enable HOLD
Query:
:STATe?
Query state of HOLD
Description:
This command is used to enable or disable HOLD.
