21
Set Format: :PARA:FOOT <data>
Query Format: :PARA:FOOT?
Data:
Data Type: Enumeration, 1 byte
Data Range
：
TRIG, HOLD
Data Accuracy: -
Data Unit: -
Set Example: To set the foot switch to rising edge trigger, enter the command: :PARA:FOOT TRIG
Query Example: If you enter the command: :PARA:FOOT?, the returned content is: TRIG, indicating the
current foot switch is rising edge triger.
4.2.3 State Sub-System Command
:STAT:HOST
Function: Query the current state of the host.
Command Format:
Query Format: :STAT:HOST?
Returned Info:
Data type: Unsigned integer, 1 byte
Data Range: 0~31(0x1F)
Meaning:
Bit0: On or Off
Bit1: Running or not
Bit2: Over-heat or not
Bit3: Overload or not
Bit4: Unbalanced or not
Query Example: If you enter the command: :STAT:HOST?, the returned content is: 1 has the following
meaning:
Bit0: 1 The host has been turned on
Bit1: 0 Not running
Bit2: 0 Not overheat
Bit3: 0 Not overload
Bit4: 0 Not unbalanced
:STAT:SLAV
Function: Query the current state of the slave.
Command Format:
Query Format: :STAT:SLAV?
Returned Info:
Data type: Unsigned integer, 1 byte
Data Range: 0~31(0x1F)
Meaning:
Bit0: On or Off
Bit1: Running or not
Bit2: Over-heat or not
