Control panel
1
Stop pushbutton
If pressed for longer than 3 seconds this pushbutton will
also perform a lamp test.
2
Start pushbutton
3
Power on led
4
CPU fault warning led
When lit this indicates a PLC operating fault.
5
Communication error warning led
Fix: fault in the communication between display and PLC.
Data trasmission retry.
Flashing: display results disconnected.
Check the electrical connection.
6
Reset pushbutton
This acts as a safety device reset pushbutton
7
Acoustic alarm
8
Emergency stop pushbutton machine
In the event of an emergency press this pushbutton to
immediately stop all those motors which might constitute
a danger for the operator.
9
Programming key
10
Machine automatic restart service/running
warning light
11
Display
12
Jack plug socket
When the remote control jack is plugged into this socket
the machine cannot be started from the main control
panel and the safety switches of the control circuit are
disenabled.
12
Main switch
PART A
PAGE A-2
