28
The Nike+ SportWatch GPS User’s Guide
To improve overall accuracy and record every step of your run turn the GPS and
shoe sensor “on.” You’ll want to do this if you’re running in a tunnel, or a forest,
where the satellite signal might, temporarily, get lost.
By default, the GPS function is “on.” If you want to turn it off, go to run > GPS > off.
To link to a shoe pod, go to run > Shoe Pod > on.
on
on
GPS
Shoe Pod
cancel
Options
continue
Note: You can link your watch to up to 7 other shoe sensors, and 7 other heart rate monitors.
(Go to run > Options > New Sensor.)
If you lose the connection to a sensor, your watch will go into a paused state
automatically. If the paused state is on for an additional 30 minutes, then your watch
will end the run.
To pause your run, press the Select button. If you enter the paused state
intentionally, your watch will end your run after 30 minutes.
highlight a sensor, then
press select to turn “on
and “off.”
Running with GPS and Shoe Sensor
Losing Connection to a Sensor
Pausing Your Run
fig. 42
Summary of Contents for Nike+ SportWatch GPS
Page 1: ......
