22
The Nike+ SportWatch GPS User’s Guide
If the battery or memory is getting low, you’ll hear an alarm. You’ll hear three
tones, and the backlight will be lit for 5 seconds. You’ll also see one of the
following messages: Low Memory, Memory Full and/or Low Battery. Push the
Select button once to dismiss the alarm.
When you see any of these screens, or hear these alarms, plug your watch into
a USB port of your computer to upload your run data and/or to recharge the
battery. These three alarm messages may also appear when you end a run.
Note: You’ll only hear these alarms if you have sound turned on in the Customize tab of
Nike+ Connect.
Warnings
“Low Memory” appears when the amount of data on your
watch is close to its maximum capacity. You will still be
able to start your run, but you could reach maximum
capacity during your run, at which point your run will end
and your run info will be saved.
“Memory Full” may appear when you try to start a run
with no memory remaining. You will automatically be
returned to the previous screen. You should upload your
run data to clear the current data on the watch, and free
up the memory.
“Low Battery” appears when the battery level is equal to
or below its memory reserve of one hour. You’ll have
approximately another hour of run time before the battery
will run out.
fig. 27
fig. 28
fig. 29
Low
Battery
!
ok
Memory
Full
ok
Low
Memory
ok
Summary of Contents for Nike+ SportWatch GPS
Page 1: ......
