background image

IMPORTANT SAFETY INSTRUCTIONS: 

• 

When using your equipment, basic safety precautions should always be followed to reduce the

 

risk of fire, electric shock and injury to persons, including the following:

 

1.   Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or

 

laundry tub, in a wet basement or near a swimming pool.

 

2.   Use only the power cord and batteries indicated in this manual. Do not dispose of batteries

 

in a fire, they may explode. Check with local regulations for possible special disposal instructions.

technical specifications

No. of channels:
Frequency:
Power supply of Baby Unit:

Power supply of Parent Unit:

Transmitting power:
Operating temperature:
Range

Refresh rate
Display

50
2402-2478.5
Switching mode power supply, 6V/800mA or 4 x AA 

alkaline batteries
Switching mode power supply, 6V/800mA or 950mA 

Li-Polymer batteries
100mW
10°C to 39°C
Indoor => 50m, Outdoor 300m approx. depending on the 

surrounding conditions as well as spatial and structural 

factors.  
Up to 25 fps, Dynamic Frame Rate
Color LCD (QVGA 320x240 pixel)

Use only with class 2 power source

DECLARATION OF CONFORMITY

We, Jackel International Ltd trading as Mayborn Baby and Child
Dudley Lane, Cramlington, Northumberland, NE23 7RH, UK

declare under our responsibility that the electrical product:

Tommee Tippee Model 1094S
Closer to Nature Digital Video Baby Monitor
Closer to Nature Digital Video Baby Monitor with Movement Sensor Pad

which this declaration relates to is in conformity with the following standards:

RF: EN 300 328
RF: EN 50371
EMC: EN 301489-1/-17
LVD: EN 60950-1
LED: EN 60825

Following the provisions of 1999/5/EC (R&TTE Directive) the product is produced by a manufacturing 
organisation accredited to ISO 9001

Andrew Richardson - Quality Assurance Manager

Cramlington, December 2011 

If you are having any problems in setting up your monitor or require any further information 
please visit our website www.tommeetippee.com

Please retain our address for future reference:
Mayborn Baby and Child
Northumberland Business Park West
Cramlington
Northumberland
NE23 7RH, UK

441010

Summary of Contents for 1094SB











Reviews: