Tomei Expreme Ti, User & Installation Manual

Page: 12 / 20

REQUIRED TOOLS FOR INSTALLATION
■ General engine maintenance tools ■ Torque wrench ■ Official servicing manual ■ Hand Drill
■ Center Drill and Φ6.5mm Drill Bit ■ Safety Gear
CAUTION
■ The information continued in this installation manual is specific to this product.
For details regarding the removal/installation of stock components, please refer to the
vehicle's official servicing manual.
■ This product is intended for motorsport/competition use and should
NOT
be used on public roads.
■ This product should be installed by a trained professional in a well-equipped workshop.
■ Only install this product on the specified vehicle(s) to avoid product and/or engine damage.
■ Ensure the appropriate amount of torque is used to remove/install the fastenings. Do
NOT
use
excessive force as this can damage the product and/or the engine.
■ Always use the appropriate tools and safety equipment when installing this product.
Failing to do so is extremely dangerous and may result in injury.
WARNING
■ Only install this product when the engine and all related components are cold.
■ Ensure that all parts are fitted correctly during installation to avoid potential fir hazards
and/or damage. Failing to do so is not only dangerous to you but also those around you.
1. REMOVING THE STOCK EXHAUST
This manual only provides basic instructions. For more details, please refer to the vehicle's
official servicing manual.
1. Disconnect the negative battery terminal.
2. Remove the tail pipe assy.
3. Remove the center pipe assy.
12