TOMAHAWK TW-9010
ATTENTION!
Remote engine start-up cannot be done in the case if:
1.
Gear lever is not in neutral position.
2.
Ignition switched ON.
3.
The hood is open.
4.
The hand-brake is not engaged.
In any of these occasions, siren will sound 4 “CHIRPS” at a remote start-up attempt.
13.
Remote Engine Stop
In the case when the engine was started using remote start-up, you can stop it by pressing button
. Parking lights will flash 4 times; siren will sound 4 “CHIRPS”. LCD will hide icon
and
a melody will play.
14.
Warming-up Engine to Specified Temperature
Tomahawk provides for an auxiliary temperature sensor for installation under the hood (see
Diagram No.10). If this sensor is installed, engine start and warm-up is performed by this sensor’s
data, otherwise by the cabin temperature sensor data.
To enable this function, press and hold buttons
and
simultaneously. Parking lights
will flash 1 time and siren will sound 1 “CHIRP” to confirm enabling the function. LCD will display
icon
and the specified temperature for warm-up switch-on (programmable, see Programming
Table) accompanied with a melody. When temperature reaches the specified value for automatic
warm-up switch-on, the engine will start for previously programmed time (see Programming Table).
9
Summary of Contents for TW-9010
Page 4: ...TOMAHAWK TW 9010 2 Remote Control Trinkets 3 ...
Page 30: ...TOMAHAWK TW 9010 Wire Connections Fig 4 29 ...
Page 32: ...TOMAHAWK TW 9010 6 PIN central lock connection socket 18 PIN main socket Diagram 2 31 ...
Page 36: ...TOMAHAWK TW 9010 Diagram 8 Diagram 9 35 ...
