Operator’s Manual
32
5.4 Exciter
5.4.1 Check oil level:
1. Tilt the vibration plate for 10 degree.
2. Open filler bore (25).
3. The oil level must reach the start of the thread of the filler bore.
4. If necessary, pour in Shell Omala oil 100 through filler bore (use funnel 0.8 l).
5. Close filler bore. (Tightening torque 100 Nm)
5.4.2 Changing the oil:
1. Open filler bore (30).
2. Tilt vibration plate and keep it tilted until the oil has run out.
3. Place vibration plate in horizontal position.
4. Pour in 0.8 l Shell Omala oil 100 through the filler bore.
5. Close filler bore. (Tightening torque 100 Nm)
Do not pour in too much oil!
Take notice:
Please pay attention to the corresponding environmental laws when disposing of
used engine oil. We recommend you carry the oil in a container to a central collecting point for
used oils. Do not pour used engine oil into the garbage nor into the sewer system, waste pipes or
even on the ground.
