Operator’s Manual
23
Transport to work site /Recommendations on
compaction
3.
Transport to work site /Recommendations on compaction
3.1 Transport to work site
Conditions:
•
To transport the vibration plate, only use suitable lifting equipment with a minimum load-
bearing capacity of 500 kg.
•
Always switch off engine before transporting the machine!
•
Vertically set guide handle head and lock into place using the lock hook (41).
•
Only attach suitable tackle at the central lifting point (40) provided. The central lifting point
is located exactly above the centre of gravity of the machine. The central lifting point can
be displaced rearwards (40), given an application in which the height of the machine is of
importance (torque wrench setting = 85 Nm).
Note: Also observe the regulations in safety instructions.
