Operator’s Manual
10
2.3 Protective gear
Work clothing
Clothing should be appropriate, i.e. should be close-fitting but not restrict your movement.
When on construction sites, do not wear long hair loosely, loose clothing or jewelry
including rings. These objects can easily get caught or be drawn in by moving machine
parts.
Only wear clothing made of material that is not easily flammable.
Personal protective gear
Wear personal protective gear to avoid injuries or health hazards:
•
Non-skid, hard-toed shoes.
•
Work gloves made of durable material.
•
Overalls made of durable material.
•
Hard hat.
•
Ear protection.
Ear protection
This machine generates noise that exceeds the country-specific permissible noise levels
(individual rating level). It may therefore be necessary to wear ear protection. You can
find the exact value in the chapter Technical Data.
When wearing ear protection while working, you must pay attention and exercise
caution because you’re hearing is limited, e.g. in case someone screams or a signal tone
sounds.
Tomahawk Power
recommends that you always wear ear protection.
2.4 Transport
Switching off the machine
Before you transport the machine, it must be switched off, and the engine must be given
sufficient time to cool down.
Center pole in transport position
Before commencing transport, move the center pole to the transport position. Let the
center pole latch into its lock.
Observing hazardous materials regulations
Observe the national safety guidelines and the hazardous materials regulations that apply
to the respective means of transportation.
