Version 1.1
Copyright by
CYTECH 2006
8. Reattach the front grub screw back
into the Handlebar until the end of the
grub Screw (02 30 06) almost touches
the Handlebar Post.
Finally, Slide the Handlebar to the
desired position, and retighten the
Adjustment Knob.
9. Identify the Right Pedal. Carefully
insert the Right Pedal into the Crank
Arm by turning by hand clockwise
assuring that it enters horizontally
aligned. Using a 15mm pedal wrench,
firmly tighten the Right Pedal clockwise
into the Right Crank Arm. Repeat the
same procedure for the Left Pedal but in
a counter Clockwise motion.
To avoid damaging the indoor cycle, use
only a 15mm pedal wrench to attach the
Pedals.
10. Make sure that all parts are properly tightened before the indoor cycle is used. To
protect the floor or carpet, place a mat under the indoor cycle.
8
9
USER’S MANUAL – S/X-SERIES
www.indoorcycling.com
ENG 8
