Procedures not specifically explained in this manual must be performed only by a qualified
technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the
Generator to its “OFF” position, wait for the engine to cool, and disconnect the spark plug cap before
performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM EQUIPMENT FAILURE:
Do not use damaged equipment. If abnormal noise, vibration, or excess
smoking occurs, have the problem corrected before further use. Follow all service instructions in this
manual. The engine may fail critically if not serviced properly.
Many maintenance procedures, including any not detailed in this manual, will need to be
performed by a qualified technician for safety. If you have any doubts about your ability to safely service
the equipment or engine, have a qualified technician service the equipment instead.
User-Maintenance Instructions
Cleaning, Maintenance, and Lubrication
OPERATING INSTRUCTIONS
13
Note:
This maintenance schedule is intended solely as a general guide. If performance decreases or if
equipment operates unusually, check systems immediately. The maintenance needs of each piece of
equipment will differ depending on factors such as duty cycle, temperature, air quality, fuel quality, and
other factors.
Note:
The following procedures are in addition to the regular checks and maintenance explained as part
of the regular operation of the engine and equipment.
Procedure
Before
Each
Use
Monthly
or every
20hr. of
use
Monthly
or every
20hr. of
use
Monthly
or every
20 hr. of
use
Yearly
or
every
300
hr. of
use
Every
2
Years
Brush off outside of
engine
Check engine oil level
Check air cleaner
Check deposit cup
Change engine oil
Clean/replace air cleaner
Check and clean spark
plug
1. Check/adjust idle
speed 2. Check/adjust
valve clearance 3. Clean
fuel tank, strainer and
carburetor 4. Clean
carbon build-up from
Replace fuel line if
necessary
*Service more frequently when used in dusty areas.
**These items should be serviced by a qualified technician.
