Starting the Engine
Manual Start
OPERATING INSTRUCTIONS
11
Before Starting the Engine
a. inspect the generator and engine.
b. Disconnect all electrical loads from the generator.
c. Fill the engine with the proper amount and type of both stabilizer-treated unleaded gasoline and oil.
1. Open vent on Gas Cap
2. Move the Economy (ECO) Switch to the OFF position.
3. Turn the Combination Switch to the CHOKE position.
4. Grip the Starter Handle of the Engine loosely and pull it slowly several times to allow the gasoline to flow
into the Engine’s carburetor. Then pull the Starter Handle gently until resistance is felt. Allow Cable to
retract fully and then pull it quickly. Repeat until the Engine starts. Do not let the Starter Handle snap
back against the housing. Hold it as it recoils so it doesn't hit the housing.
NOTE:
If engine does not start, check engine oil level. Engine will not start with low or no engine oil.
NOTE:
If warm engine does not start, turn Combination Switch to RUN before trying to start it again.
1
2/3
4
Summary of Contents for 79986
Page 23: ......
