manualshive.com logo in svg

Tolis Group bruAPP, Administrator'S Manual

Share
Download
Tolis Group bruAPP Administrator'S Manual Download Page 39

Notification

Priority

Description

DiskMissing

Warning

The bruAPP RAID has reported disk __ as missing from the 
RAID array.  The RAID is therefore offline and all D2D backups 
are disabled.

The bruAPP has detected that there is a tape device attached, 
please go to the bruAPP, acknowledge this warning by 
pressing [ENTER] to enable backup operations to the attached 
tape device.  Once done, please contact TOLIS Group 
Technical Support for further assistance.

The bruAPP will not finish it

ʼ

s boot sequence until an 

administrator has acknowledged this warning.

TapeOnly

Warning

The bruAPP has been set to Tape Only Mode because disk __ 
is missing from the bruAPP RAID array.  A tape device has 
been found to be connected to the bruAPP system and an 
administrator has acknowledged the missing bruAPP disk.

Please contact TOLIS Group Technical Support for further 
assistance.

MissingD2T

High

The bruAPP RAID has reported disk __ as missing from the 
RAID array.  The bruAPP has also detected that there are no 
tape devices attached and therefore all backups, Disk-to-Disk 
and Disk-to-Tape, have been disabled. The unit is now offline.

At this point, the bruAPP Backup Appliance cannot perform 
backup operations due to missing hardware and is halted.

RAIDFailure

High

The bruAPP RAID has detected a failure and needs immediate 
attention.

This message will also cause an email to be sent to the 
bruAPP RAID Administrator.

Figure 8.13 — bruAPP web alerts and descriptions.

Rebuild RAID

The bruAPP/OS allows the ability to completely rebuild the RAID array in the even that there have been 
too many disks fail or if there is any other reason in which the whole RAID needs to be completely 
erased and rebuilt from scratch.

Warning

The “Rebuild RAID” option will completely erase all RAID hard drives, including any 
data that resides on them, in order to properly rebuild the RAID array.  If you have 
staged archives on the bruAPP RAID array, it is strongly advised that you perform an 
UpStage operation to move the archives from disk to tape so that you may restore 
from the BRU Server archives in the future.

The erase operation will not removed, alter, change, or update the BRU Server database in any way.

39

Summary of Contents for bruAPP




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands