Toledo Brake Monitor, Installation And Operation Manual

Page: 17 / 29

Doc #0017289 Brake Monitor Operator Manual Page 14
SECTION 7
SYSTEM SETUP
From the Menu Select Screen, select System Setup and press the <ENTER> key. You
will be prompted for the password. Enter the required password, then press the
<ENTER> key. If the wrong password is entered, the screen will flash “INCORRECT
PASSWORD”. Either retry to enter the correct password, or press <BACK> to go back
to the Menu Select Screen.
NOTE: The Global Password is used to access this screen.
After the correct password has been entered, the System Setup Menu screen (shown
above) will be displayed. The following 4 options will be listed: Set Press Angle,
Restore Defaults, Edit Passwords and No Motion. Use either the alpha-numeric keys or
the arrow keys to select which System Setup to edit. When the correct selection is
flashing, press the
<ENTER> key.